Go Kart Bearings

Heavy Duty High Speed Bearing, 7/16" Thick.

Heavy Duty High Speed Bearing, 7/16" Thick.

Standard Flanged Bearing, 5/16" Thick.
For low to moderate speeds, light to medium loads.

Standard Flanged Bearing, 5/16" Thick.
For low to moderate speeds, light to medium loads.

High Quality Flanged Bearing.
7/16" Thick. Heavy Duty FR62RS.

Flanged Bearing, 5/16" Thick. Mainly used for Electric Wheelchair applications. Use on a go kart would be extremely rare. For low to moderate speeds, light to medium loads.

17mm ID x 35mm OD x 10mm Thick

Fits American Sportworks 14691 Jackshaft with Step Down

Fits American Sportworks Model 6150.

Uses 8212 Bearing Flanges.
Can be used with or without the Eccentric Lock Collar.

Uses 8212 Bearing Flanges.

Uses Mounting Flange Part #8282.

0.085" Thick Steel. 2 Flanges Required for each bearing. Sold one half at a time. Order 2 flanges if you're installing 1 axle bearing. Order 4 flanges if you're installing 2 bearings.

0.085" Thick Steel. 2 Flanges Required for each bearing. Sold one half at a time. Order 2 flanges if you're installing 1 axle bearing. Order 4 flanges if you're installing 2 bearings.

P205 Pillow Block for 1" and 7/8" Axle Bearings. Fits 1" Axle Bearing Part # SA205-16, 7/8" Hex Axle Bearing Part # SA205-78 and Manco 7/8" Hex Axle Bearing Part # 3941H. Used to Mount an Axle Bearing Perpindicular to a Flat Surface.

Go Kart Live Axle Bearing Kit for Round 1" OD Axles with a 1/4" Keyway. (2) 1" ID Self Aligning Axle Bearings, with Set Screws. (2) Sets of 2 Hole Bearing Flanges, (2) Thick Steel Bearing Hangers (weld to frame), Bolts and Locknuts. Everything to install a 1" Axle.

Go Kart Live Axle Bearing Kit for Round 1" OD Axles with a 1/4" Keyway. (2) 1" ID Self Aligning Axle Bearings, with Set Screws. (2) Sets of 3 Hole Bearing Flanges, (2) Thick Steel Bearing Hangers (weld to frame), Bolts and Locknuts. Everything to install a 1" Axle.

Go Kart Live Axle Bearing Kit for Round 3/4" OD Axles with a Keyway. Includes (2) 3/4" ID Self Aligning Axle Bearings, with Set Screws. (2) Sets of 2 Hole Bearing Flanges, (2) Thick Steel Bearing Hangers (weld to frame), Bolts and Locknuts. Everything to install a 3/4" Axle.