Go Kart Steering Shaft Hardware Kit, Less Shaft, with Pitman Arms. Pitman Arms for 5/8" OD Steering Shaft, 5/8" Shaft Hole, 5/16" Bolt Hole, 5 GA. (.21O"), 1-5/8" Center to Center with 3/16" Offset. Hub, Splined for 5/8" OD Steering Shaft, 2 Bolt Circles. Three 1/4-28 X 3/4" Bolt, 1/16" Hole drilled 3/32" from end. 3/32" X 3/4" Cotter Pin, 1/16" X 1/2" Cotter Pin, 1/4-28 Slotted Hex Nut, 1/2-20 Slotted Hex Nut, Two 5/8" ID X 1-1/8" OD X 1/2" wide Lock Collars. Hardware Zinc Plated.

  
| No reviews for this product.