Heavy Gauge Steel for long lasting life
Four 3/8" bolt holes on a 2-7/8" bolt bole circle, 2" center hole

Six 5/16" bolt holes on a 3-1/4" bolt hole circle, 1-3/8" center hole
Fits Early Model Manco 3.5hp "Streaker" Mini Bikes & Single Wheel Pull Go Karts
These were used on the old three hole, cast aluminum rims, which are now obsolete.

6 bolt holes on a 3-1/4" bolt hole circle, 1-3/8" center hole
Can also be used on 4 hole sprockets with a 2-7/8" bolt hole circle.

These sprockets have two different sets of mounting holes.
One set of (4) 3/8" mounting holes on a 2-7/8" bolt hole circle.
One set of (4) 5/16" mounting holes on a 2-13/16" bolt hole circle.

Steel Spockets for Carter Brothers Go Karts
Four 3/8" bolt holes in a 3-3/32" bolt hole circle, 1-15/16" center hole.

Used with 5" or 6" Azusa Tri Star Wheels - 3.75" bolt hole circle.

Fits Sprocket Hub Part #1872, #APH1, #APH124 or #APHM
Six 1/4" bolt holes on a 5-1/4" bolt circle, 4-9/16" center hole.

Fits Sprocket Hub Part #1872, #APH1, #APH124 or #APHM
Six 1/4" bolt holes on a 5-1/4" bolt circle, 4-9/16" center hole.

Slides onto a 1" round axle with a 1/4" keyway.
Uses 'Live Axle' Sprockets with a 4-9/16" center hole.
Fits Sprocket 2998, 2166-40, 6282, 9338, 2047, 2048, 2049, 2670, 2684

Slides directly onto the axle, mounting hardware included.
Uses live axle sprockets with a 4-9/16" Center Hole, 5-1/4" Bolt Hole Circle
Fits Sprocket Part #2998B, 2166-40, 6282, 9338, 2047, 2048, 2049, 2670 & 2684

Slides directly onto the axle, mounting hardware included.
Mounts sprockets onto any 1" round live axle with a 1/4" keyway.
Uses live axle sprockets with a 4-9/16" center hole, 5-1/4" bolt hole circle
Fits Sprocket Part #2998, 2166-40, 6282, 9338, 2047, 2048, 2049, 2670 & 2684

Aluminum .125" Thick with (6) 1/4" bolt Holes.
Premium heat treated aluminum. Root split for perfect alignment.

Aluminum .160" Thick with (6) 1/4" bolt holes.
Premium heat treated aluminum. Root split for perfect alignment.

Zinc Plated Steel. Grade 5 locknuts and set screw included.
For 1" Axles with a 1/4" keyway. (4) 5/16" bolts, 4" bolt hole circle
Uses Sprocket Part #T5314-60, #T5314-66 or #T5314-72 Below

Use with Sprocket Hub Part #2286 ONLY (sold above)
(4) 5/16" mounting holes on a 4" bolt hole circle, 1-1/2" center hole

Sprocket part numbers ending in the letter G fit Comet TAV and TAV2 Bolt on Kits.

The 12 tooth sprockets for #35 chain are available with a built in key,
part #3504G pictured above left, or without a built in key, has a keyway, part #200379G.

The nine tooth sprockets are available with a built in key,
part #8720G pictured above right, or without a built in key, has a keyway, part #202154G

Install 3/16" keystock in the keyway of sprockets without built in keys

All sprockets with a "K" in their part number have a built in key, no key required